01845 522992
Description
Separator/Filter for bulk liquid removal from Hankison. Features a 3 micron coalescing filter. Removes water and aerosols up to 5.0mg/m3.
This separator/filter is designed to be used down stream of aftercoolers or at the point-of-use if no aftercooler/seperator is used upstream (heavily contaminated air).
Features Two Stage Filtration as follows:
First Stage - two stainless steel orifice tubes provide 10 micron mechanical separation.
Second Stage - in-depth fibre media captures solid and liquid particles up to 3 microns.
These filters conform to ISO Quality Standard 8573.1 Quality Class - Solids: Class 3, Oil Content: Class 5. Please refer to the attached data sheet for a full explanation.
To find the maximum flow at pressures other than 7 bar, please consult the pressure correction table at the end of the attached datasheet.
All filters are supplied with a differential pressure gauge. Automatic drains are included up to F17-B-SF only.
Filters are available with connection sizes of 1/4" BSP to 3" BSP and DN 80 to DN 150 flange.
Element(s) is(are) included with the filter. Larger filters require more than one element.
To order spare elements please use the link below and the part number and qty shown. For example: SF-04 x 1 means 1 off element part number SF-04 is required for this filter.
This range supersedes HF9 filter from Hankison which has been discontinued (March 2010).
Mmodular connection kits for joining two filters and wall mounting brackets are available on request.
Technical Details
|
Datasheets
NGF_Filter_EN
HF Filters
|
Related Products